parent
dfffb99ae4
commit
9702b1543d
@ -1,138 +1,252 @@ |
|||||||
/**
|
#include <Arduino.h> |
||||||
* |
#include <avr/sleep.h> |
||||||
* HX711 library for Arduino - example file |
|
||||||
* https://github.com/bogde/HX711
|
|
||||||
* |
|
||||||
* MIT License |
|
||||||
* (c) 2018 Bogdan Necula |
|
||||||
* |
|
||||||
**/ |
|
||||||
|
|
||||||
#include "HX711.h" |
// const byte wakeUpPin = 7;
|
||||||
|
const byte ledPin = 17; |
||||||
|
const byte RtcSquareWavePin = 7; |
||||||
|
// const byte RtcSquareWaveInterrupt = digitalPinToInterrupt(RtcSquareWavePin);
|
||||||
|
const byte RtcSquareWaveInterrupt = digitalPinToInterrupt(RtcSquareWavePin); |
||||||
|
|
||||||
|
void wake() |
||||||
// HX711 circuit wiring
|
{ |
||||||
const int LOADCELL_DOUT_PIN = 21; |
sleep_disable(); |
||||||
const int LOADCELL_SCK_PIN = 20; |
detachInterrupt(RtcSquareWaveInterrupt); |
||||||
|
|
||||||
|
|
||||||
HX711 scale; |
|
||||||
|
|
||||||
void setup() { |
|
||||||
Serial.begin(38400); |
|
||||||
Serial.println("HX711 Demo"); |
|
||||||
|
|
||||||
Serial.println("Initializing the scale"); |
|
||||||
|
|
||||||
// Initialize library with data output pin, clock input pin and gain factor.
|
|
||||||
// Channel selection is made by passing the appropriate gain:
|
|
||||||
// - With a gain factor of 64 or 128, channel A is selected
|
|
||||||
// - With a gain factor of 32, channel B is selected
|
|
||||||
// By omitting the gain factor parameter, the library
|
|
||||||
// default "128" (Channel A) is used here.
|
|
||||||
scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN); |
|
||||||
|
|
||||||
Serial.println("Before setting up the scale:"); |
|
||||||
Serial.print("read: \t\t"); |
|
||||||
Serial.println(scale.read()); // print a raw reading from the ADC
|
|
||||||
|
|
||||||
Serial.print("read average: \t\t"); |
|
||||||
Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
|
|
||||||
|
|
||||||
Serial.print("get value: \t\t"); |
|
||||||
Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight (not set yet)
|
|
||||||
|
|
||||||
Serial.print("get units: \t\t"); |
|
||||||
Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight (not set) divided
|
|
||||||
// by the SCALE parameter (not set yet)
|
|
||||||
|
|
||||||
scale.set_scale(1000.f); // this value is obtained by calibrating the scale with known weights; see the README for details
|
|
||||||
scale.tare(); // reset the scale to 0
|
|
||||||
|
|
||||||
Serial.println("After setting up the scale:"); |
|
||||||
|
|
||||||
Serial.print("read: \t\t"); |
|
||||||
Serial.println(scale.read()); // print a raw reading from the ADC
|
|
||||||
|
|
||||||
Serial.print("read average: \t\t"); |
|
||||||
Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
|
|
||||||
|
|
||||||
Serial.print("get value: \t\t"); |
|
||||||
Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight, set with tare()
|
|
||||||
|
|
||||||
Serial.print("get units: \t\t"); |
|
||||||
Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight, divided
|
|
||||||
// by the SCALE parameter set with set_scale
|
|
||||||
|
|
||||||
Serial.println("Readings:"); |
|
||||||
} |
} |
||||||
|
|
||||||
void loop() { |
void sleepNow() |
||||||
Serial.print("one reading:\t"); |
{ |
||||||
Serial.print(scale.get_units(), 1); |
set_sleep_mode(SLEEP_MODE_PWR_DOWN); |
||||||
Serial.print("\t| average:\t"); |
noInterrupts(); |
||||||
Serial.println(scale.get_units(10), 1); |
sleep_enable(); |
||||||
|
attachInterrupt(RtcSquareWaveInterrupt, wake, LOW); |
||||||
scale.power_down(); // put the ADC in sleep mode
|
interrupts(); |
||||||
delay(1000); |
sleep_cpu(); |
||||||
scale.power_up(); |
|
||||||
} |
} |
||||||
|
|
||||||
|
// CONNECTIONS:
|
||||||
|
// DS3231 SDA --> SDA
|
||||||
|
// DS3231 SCL --> SCL
|
||||||
|
// DS3231 VCC --> 3.3v or 5v
|
||||||
|
// DS3231 GND --> GND
|
||||||
|
// SQW ---> (Pin19) Don't forget to pullup (4.7k to 10k to VCC)
|
||||||
|
|
||||||
|
/* for software wire use below
|
||||||
/* #include <Arduino.h>
|
#include <SoftwareWire.h> // must be included here so that Arduino library object file references work |
||||||
#include <HX711.h> |
|
||||||
#include <RtcDS3231.h> |
#include <RtcDS3231.h> |
||||||
|
|
||||||
|
SoftwareWire myWire(SDA, SCL); |
||||||
|
RtcDS3231<SoftwareWire> Rtc(myWire); |
||||||
|
for software wire use above */ |
||||||
|
|
||||||
|
/* for normal hardware wire use below */ |
||||||
int RXLED = 17; // The RX LED has a defined Arduino pin
|
#include <Wire.h> // must be included here so that Arduino library object file references work |
||||||
// Note: The TX LED was not so lucky, we'll need to use pre-defined
|
#include <RtcDS3231.h> |
||||||
// macros (TXLED1, TXLED0) to control that.
|
RtcDS3231<TwoWire> Rtc(Wire); |
||||||
// (We could use the same macros for the RX LED too -- RXLED1,
|
/* for normal hardware wire use above */ |
||||||
// and RXLED0.)
|
|
||||||
|
bool Alarmed(); |
||||||
// 1. HX711 circuit wiring
|
void printDateTime(const RtcDateTime &dt); |
||||||
const int LOADCELL_DOUT_PIN = 21; |
const byte LED = 17; |
||||||
const int LOADCELL_SCK_PIN = 20; |
|
||||||
|
// Interrupt Pin Lookup Table
|
||||||
// 2. Adjustment settings
|
// (copied from Arduino Docs)
|
||||||
const long LOADCELL_OFFSET = 50682624; |
//
|
||||||
const long LOADCELL_DIVIDER = 5895655; |
// CAUTION: The interrupts are Arduino numbers NOT Atmel numbers
|
||||||
|
// and may not match (example, Mega2560 int.4 is actually Atmel Int2)
|
||||||
HX711 loadcell; |
// this is only an issue if you plan to use the lower level interupt features
|
||||||
|
//
|
||||||
|
// Board int.0 int.1 int.2 int.3 int.4 int.5
|
||||||
|
// ---------------------------------------------------------------
|
||||||
|
// Uno, Ethernet 2 3
|
||||||
|
// Mega2560 2 3 21 20 [19] 18
|
||||||
|
// Leonardo 3 2 0 1 7
|
||||||
|
|
||||||
|
// #define RtcSquareWavePin 7 // Mega2560
|
||||||
|
// #define RtcSquareWaveInterrupt 4 // Mega2560
|
||||||
|
|
||||||
|
// marked volatile so interrupt can safely modify them and
|
||||||
|
// other code can safely read and modify them
|
||||||
|
volatile uint16_t interuptCount = 0; |
||||||
|
volatile bool interuptFlag = false; |
||||||
|
|
||||||
|
void ISR_ATTR InteruptServiceRoutine() |
||||||
|
{ |
||||||
|
// since this interupted any other running code,
|
||||||
|
// don't do anything that takes long and especially avoid
|
||||||
|
// any communications calls within this routine
|
||||||
|
interuptCount++; |
||||||
|
interuptFlag = true; |
||||||
|
} |
||||||
|
|
||||||
void setup() |
void setup() |
||||||
{ |
{ |
||||||
pinMode(RXLED, OUTPUT); // Set RX LED as an output
|
Serial.begin(9600); |
||||||
// TX LED is set as an output behind the scenes
|
|
||||||
|
// set the interupt pin to input mode
|
||||||
Serial.begin(9600); //This pipes to the serial monitor
|
pinMode(RtcSquareWavePin, INPUT); |
||||||
Serial.println("Initialize Serial Monitor"); |
|
||||||
|
//--------RTC SETUP ------------
|
||||||
Serial1.begin(9600); //This is the UART, pipes to sensors attached to board
|
// if you are using ESP-01 then uncomment the line below to reset the pins to
|
||||||
Serial1.println("Initialize Serial Hardware UART Pins"); |
// the available pins for SDA, SCL
|
||||||
|
// Wire.begin(0, 2); // due to limited pins, use pin 0 and 2 for SDA, SCL
|
||||||
// 3. Initialize library
|
|
||||||
loadcell.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN); |
Rtc.Begin(); |
||||||
loadcell.set_scale(LOADCELL_DIVIDER); |
|
||||||
loadcell.set_offset(LOADCELL_OFFSET); |
RtcDateTime compiled = RtcDateTime(__DATE__, __TIME__); |
||||||
|
|
||||||
|
if (!Rtc.IsDateTimeValid()) |
||||||
|
{ |
||||||
|
if (Rtc.LastError() != 0) |
||||||
|
{ |
||||||
|
// we have a communications error
|
||||||
|
// see https://www.arduino.cc/en/Reference/WireEndTransmission for
|
||||||
|
// what the number means
|
||||||
|
Serial.print("RTC communications error = "); |
||||||
|
Serial.println(Rtc.LastError()); |
||||||
|
} |
||||||
|
else |
||||||
|
{ |
||||||
|
Serial.println("RTC lost confidence in the DateTime!"); |
||||||
|
Rtc.SetDateTime(compiled); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
if (!Rtc.GetIsRunning()) |
||||||
|
{ |
||||||
|
Serial.println("RTC was not actively running, starting now"); |
||||||
|
Rtc.SetIsRunning(true); |
||||||
|
} |
||||||
|
|
||||||
|
RtcDateTime now = Rtc.GetDateTime(); |
||||||
|
if (now < compiled) |
||||||
|
{ |
||||||
|
Serial.println("RTC is older than compile time! (Updating DateTime)"); |
||||||
|
Rtc.SetDateTime(compiled); |
||||||
|
} |
||||||
|
|
||||||
|
Rtc.Enable32kHzPin(false); |
||||||
|
Rtc.SetSquareWavePin(DS3231SquareWavePin_ModeAlarmOne); |
||||||
|
|
||||||
|
// Alarm 1 set to trigger every day when
|
||||||
|
// the hours, minutes, and seconds match
|
||||||
|
RtcDateTime alarmTime = now + 18; // into the future
|
||||||
|
DS3231AlarmOne alarm1( |
||||||
|
alarmTime.Day(), |
||||||
|
alarmTime.Hour(), |
||||||
|
alarmTime.Minute(), |
||||||
|
alarmTime.Second(), |
||||||
|
DS3231AlarmOneControl_OncePerSecond); |
||||||
|
// DS3231AlarmOneControl_HoursMinutesSecondsMatch);
|
||||||
|
Rtc.SetAlarmOne(alarm1); |
||||||
|
|
||||||
|
// Alarm 2 set to trigger at the top of the minute
|
||||||
|
DS3231AlarmTwo alarm2( |
||||||
|
0, |
||||||
|
0, |
||||||
|
0, |
||||||
|
DS3231AlarmTwoControl_OncePerMinute); |
||||||
|
Rtc.SetAlarmTwo(alarm2); |
||||||
|
|
||||||
|
// throw away any old alarm state before we ran
|
||||||
|
Rtc.LatchAlarmsTriggeredFlags(); |
||||||
|
|
||||||
|
// setup external interupt
|
||||||
|
attachInterrupt(RtcSquareWaveInterrupt, InteruptServiceRoutine, FALLING); |
||||||
} |
} |
||||||
|
|
||||||
void loop() |
void loop() |
||||||
{ |
{ |
||||||
// Serial.println("Hello world!!!"); // Print "Hello World" to the Serial Monitor
|
if (!Rtc.IsDateTimeValid()) |
||||||
// Serial1.println("Hello! Can anybody hear me?"); // Print "Hello!" over hardware UART
|
{ |
||||||
|
if (Rtc.LastError() != 0) |
||||||
|
{ |
||||||
|
// we have a communications error
|
||||||
|
// see https://www.arduino.cc/en/Reference/WireEndTransmission for
|
||||||
|
// what the number means
|
||||||
|
Serial.print("RTC communications error = "); |
||||||
|
Serial.println(Rtc.LastError()); |
||||||
|
} |
||||||
|
else |
||||||
|
{ |
||||||
|
Serial.println("RTC lost confidence in the DateTime!"); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
if (Alarmed()) |
||||||
|
{ |
||||||
|
digitalWrite(LED, !digitalRead(LED)); |
||||||
|
|
||||||
|
Serial.print(">>Interupt Count: "); |
||||||
|
Serial.print(interuptCount); |
||||||
|
Serial.println("<<"); |
||||||
|
|
||||||
|
RtcDateTime now = Rtc.GetDateTime(); |
||||||
|
|
||||||
|
printDateTime(now); |
||||||
|
Serial.println(); |
||||||
|
} |
||||||
|
|
||||||
|
// pinMode(ledPin, OUTPUT);
|
||||||
|
// delay(200);
|
||||||
|
// digitalWrite(ledPin, HIGH);
|
||||||
|
// delay(500);
|
||||||
|
// digitalWrite(ledPin, LOW);
|
||||||
|
// delay(200);
|
||||||
|
// pinMode(ledPin, INPUT);
|
||||||
|
|
||||||
|
// we only want to show time every 10 seconds
|
||||||
|
// but we want to show responce to the interupt firing
|
||||||
|
// for (int timeCount = 0; timeCount < 20; timeCount++)
|
||||||
|
// {
|
||||||
|
// if (Alarmed())
|
||||||
|
// {
|
||||||
|
// Serial.print(">>Interupt Count: ");
|
||||||
|
// Serial.print(interuptCount);
|
||||||
|
// Serial.println("<<");
|
||||||
|
// digitalWrite(LED, !digitalRead(LED));
|
||||||
|
// }
|
||||||
|
// delay(500);
|
||||||
|
// }
|
||||||
|
} |
||||||
|
|
||||||
// 4. Acquire reading
|
bool Alarmed() |
||||||
Serial.print("Weight: "); |
{ |
||||||
Serial.println(loadcell.get_units(10), 2); |
bool wasAlarmed = false; |
||||||
|
if (interuptFlag) // check our flag that gets sets in the interupt
|
||||||
|
{ |
||||||
|
wasAlarmed = true; |
||||||
|
interuptFlag = false; // reset the flag
|
||||||
|
|
||||||
|
// this gives us which alarms triggered and
|
||||||
|
// then allows for others to trigger again
|
||||||
|
DS3231AlarmFlag flag = Rtc.LatchAlarmsTriggeredFlags(); |
||||||
|
|
||||||
|
if (flag & DS3231AlarmFlag_Alarm1) |
||||||
|
{ |
||||||
|
Serial.println("alarm one triggered"); |
||||||
|
} |
||||||
|
if (flag & DS3231AlarmFlag_Alarm2) |
||||||
|
{ |
||||||
|
Serial.println("alarm two triggered"); |
||||||
|
} |
||||||
|
} |
||||||
|
return wasAlarmed; |
||||||
|
} |
||||||
|
|
||||||
digitalWrite(RXLED, LOW); // set the RX LED ON
|
#define countof(a) (sizeof(a) / sizeof(a[0])) |
||||||
TXLED0; //TX LED is not tied to a normally controlled pin so a macro is needed, turn LED OFF
|
|
||||||
delay(200); // wait for a second
|
|
||||||
|
|
||||||
digitalWrite(RXLED, HIGH); // set the RX LED OFF
|
void printDateTime(const RtcDateTime &dt) |
||||||
TXLED1; //TX LED macro to turn LED ON
|
{ |
||||||
delay(200); // wait for a second
|
char datestring[20]; |
||||||
} */ |
|
||||||
|
snprintf_P(datestring, |
||||||
|
countof(datestring), |
||||||
|
PSTR("%02u/%02u/%04u %02u:%02u:%02u"), |
||||||
|
dt.Month(), |
||||||
|
dt.Day(), |
||||||
|
dt.Year(), |
||||||
|
dt.Hour(), |
||||||
|
dt.Minute(), |
||||||
|
dt.Second()); |
||||||
|
Serial.print(datestring); |
||||||
|
} |
||||||
|
Loading…
Reference in new issue